Thai Chariot scores 80 on Henry County food-safety inspection

Category:

,

• Published:

Official Georgia food-service inspection report for Thai Chariot

Thai Chariot received a score of 80 and a grade of B during a Georgia Department of Public Health inspection conducted November 16, 2026. The score reflects conditions observed during that inspection.

Inspection details

Establishment: Thai Chariot

Location: 2164 HIGHWAY 20 WEST MCDONOUGH, GA 30253, Henry County

Inspection date: November 16, 2026

Inspection purpose: Routine

Score and grade: 80/B

Inspector: Rachel Williams

Permit number: FSP-075-001899

Inspection findings

2-2A – management knowledge, responsibilities, reporting

Rule citation: 511-6-1.03(2)(o) – person-in-charge duties (pf)

Official point value: 4

Corrected during inspection: Yes

Repeat violation: Yes

Inspector notes and corrective action: PIC was unable provide documentation or otherwise satisfactorily demonstrate during the inspection, that all food employees and conditional employees are informed of their responsibility to report to management information about their health and activities as it relates to diseases that are transmissible through food. PIC was provided an employee illness reporting policy. 511-6-1.03(2)(o) – Person-in-Charge Duties (Pf) Food employees and conditional employees are informed in a verifiable manner of their responsibility to report in accordance with the Chapter, to the person in charge, information about their health and activities as they relate to diseases that are transmissible through food; Pf and

2-2B – proper eating, tasting, drinking, or tobacco use

Rule citation: 511-6-1.03(5)(k)1&2 – eating, drinking, or using tobacco (c)

Official point value: 4

Corrected during inspection: No

Repeat violation: No

Inspector notes and corrective action: Observed employee food and drink items improperly stored on food prep table. 511-6-1.03(5)(k)1&2 – Eating, Drinking, or Using Tobacco (C) (k) Hygienic Practices. 1. Employees shall not use any form of tobacco products, or electronic devices that simulate tobacco smoking, while engaged in food preparation or service, nor while in areas used for equipment or utensil washing and storage, food preparation or food storage. Employees shall only use tobacco products or electronic devices that simulate tobacco smoking in approved designated areas. 2. Employees shall consume food only in approved designated areas separate from food preparation and serving areas, equipment or utensil areas and food storage areas. However, drinking from a single service beverage cup with a secure lid and straw that is handled to prevent contamination of the employee’s hands, the container, exposed food, clean equipment, utensils and linens, unwrapped single-service and single-use articles will be allowed.

4-2A – food stored covered

Rule citation: 511-6-1.04(4)(c)1(iv) – packaged & unpackaged food, food stored covered(c)

Official point value: 4

Corrected during inspection: No

Repeat violation: No

Inspector notes and corrective action: Observed food items in the reach-in freezer stored uncovered. PIC was advised to cover all stored food items. 511-6-1.04(4)(c)1(iv) – Packaged & Unpackaged Food, food stored covered(C) (iv) Except as specified under paragraph 2. of this subsection and when cooling as specified in DPH Rule 511-6-1-.04(6)(e)2.(ii), storing the food in packages, covered containers, or wrappings, except for loosely covered or uncovered containers in which food is being cooled if protected from overhead contamination;

4-2B – food-contact surfaces: cleaned & sanitized

Rule citation: 511-6-1.05(6)(n) – manual and mechanical warewashing equipment, chemical sanitization-temperature, ph, concentration, hardness (p,pf)

Official point value: 4

Corrected during inspection: No

Repeat violation: Yes

Inspector notes and corrective action: Observed chlorine sanitizer in dish machine at 0 ppm. PIC was advised to utilize 3-compartment sink until dish machine is repaired. 511-6-1.05(6)(n) – Manual and Mechanical Warewashing Equipment, Chemical Sanitization-Temperature, pH, Concentration, Hardness (P,Pf) (n) Manual and Mechanical Warewashing Equipment, Chemical Sanitization – Temperature, pH, Concentration, and Hardness. A chemical sanitizer used in a sanitizing solution for a manual or mechanical operation at contact times specified under subsection (8)(b)3 of this Rule shall meet the requirements specified in DPH Rule 511-6-1-.07(6)(g), shall be used in accordance with the Environmental Protection Agency (EPA)-registered label use instructions P, and shall be used as follows: 1. A chlorine solution shall have a minimum temperature based on the concentration and pH of the solution as listed in the following chart; P Concentration Range Minimum Temperature MG/L PH 10 or less oF (oC) PH 8 or less oF (oC) 25-49 120 (49) 120 (49) 50-99 100 (38) 75 (24) 100 55 (13) 55 (13) 2. An iodine solution shall have a minimum temperature of 68°F (20°C)P minimum concentration between 12.5 ppm and 25 ppm, P and pH of 5.0 or less or a pH no higher than the level for which the manufacturer specifies for the solution to be effective; P 3. A quaternary ammonium compound solution shall have a minimum temperature of 75ºF (24ºC), P have a concentration as specified in DPH Rule 511-6-1-.07(6)(g) and as indicated by the manufacturer’s use directions included in the labeling, P and be used only in water with 500 ppm hardness or less or in water having a hardness no greater than specified by the EPA-registered label use instructions; P 4. If another solution of a chemical specified under paragraphs 1 through 3 of this subsection is used, the permit holder shall demonstrate to the Health Authority that the solution achieves sanitization and the use of the solution shall be approved; P 5. If a chemical sanitizer other than chlorine, iodine, or a quaternary ammonium compound is used, it shall be applied in accordance with the EPA-registered label use instructions ;P and 6. If a chemical sanitizer is generated by a device located on-site at the food service establishment, it shall be used as specified in 1-5 of this subsection and shall be produced by a device that: (i) complies with law as specified in sections 2(q)(1) and 12 of the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA), P (ii) complies with 40 CFR 152.500 Requirement for Devices and 40 CFR 156.10 Labeling Requirements, P (iii) displays the EPA device manufacturing facility registration number on the device, Pf and (iv) is operated and maintained in accordance with manufacturer’s instructions. Pf. 7. On-site chemical sanitizer generating equipment with active ingredients, such as copper, must be registered as pesticides. The active ingredient may be part of the equipment or separately added.

6-2 – proper date marking and disposition

Rule citation: 511-6-1.04(6)(g) – ready-to-eat time/temperature control for safety food, date marking (pf)

Official point value: 4

Corrected during inspection: Yes

Repeat violation: No

Inspector notes and corrective action: Observed no proper date marking on food items in reach-in cooler. PIC started the process placed date marks on items. 511-6-1.04(6)(g) – Ready-To-Eat Time/Temperature Control for Safety Food, Date Marking (Pf) (g) Ready-to-Eat Time/Temperature Control for Safety Food, Date Marking 1. Except when packaging food using a reduced oxygen packaging method, and except as specified in paragraphs 5 and 6 of this subsection, refrigerated, ready-to-eat, time/temperature control for safety food prepared and held in a food establishment for more than 24 hours shall be clearly marked to indicate the date or day by which the food shall be consumed on the premises, sold, or discarded, when held at a temperature of 41°F (5°C) or below for a maximum of 7 days. The day of preparation shall be counted as Day 1. Pf 2. Except as specified in paragraphs 5 through 7 of this subsection, refrigerated, ready-to-eat, time/temperature control for safety food prepared and packaged by a food processing plant shall be clearly marked, at the time the original container is opened in a food service establishment and if the food is held for more than 24 hours, to indicate the date or day by which the food shall be consumed on the premises, sold, or discarded, when held at a temperature of 41°F (5°C) or below for a maximum of 7 days after the original container is opened. The day the original container is opened in the food service establishment shall be counted as Day 1, except, the day or date marked by the food service establishment may not exceed a manufacturer’s use by date if the manufacturer determined the use-by date based on food safety; Pf 3. A refrigerated, ready-to-eat, time/temperature control for safety food ingredient or a portion of a refrigerated, ready-to-eat, time/temperature control for safety food that is subsequently combined with additional ingredients or portions of food shall retain the date marking of the earliest-prepared or first-prepared ingredient. Pf 4. A date marking system that meets the criteria stated in paragraphs 1 and 2 of this subsection may include: (i) Using a method approved by the Health Authority for refrigerated, ready-to-eat time / temperature control for safety food that is frequently rewrapped, such as lunchmeat or a roast, or for which date marking is impractical, such as soft serve mix or milk in a dispensing machine; (ii) Marking the date or day of preparation, with a procedure to discard the food on or before the last date or day by which the food must be consumed on the premises, sold, or discarded; (iii) Marking the date or day the original container is opened in a food service establishment, with a procedure to discard the food on or before the last date or day by which the food must be consumed on the premises, sold, or discarded; or (iv) Using calendar dates, days of the week, color-coded marks, or other effective marking methods, provided that the marking system is disclosed to the Health Authority upon request. 5. The requirements in paragraphs 1 and 2 of this subsection do not apply to individual meal portions served or repackaged for sale from a bulk container upon a consumer’s request. 6. The requirements in paragraphs 1 and 2 of this subsection do not apply to shellstock. 7. The requirement in paragraph 2 of this subsection does not apply to the following foods prepared and packaged by a food processing plant inspected by a Health Authority: (i) Deli salads, such as ham salad, seafood salad, chicken salad, egg salad, pasta salad, potato salad, and macaroni salad, manufactured in accordance with 21 CFR 117 Current good manufacturing practice in manufacturing, packing, or holding human food; (ii) Hard cheeses containing not more than 39% moisture as defined in 21 CFR 133 Cheeses and related cheese products, such as cheddar, gruyere, parmesan and reggiano, and romano; (iii) Semi-soft cheeses containing more than 39% moisture, but not more than 50% moisture, as defined in 21 CFR 133 Cheeses and related cheese products, such as blue, edam, gorgonzola, gouda, and monterey jack; (iv) Cultured dairy products as defined in 21 CFR 131 Milk and cream, such as yogurt, sour cream, and buttermilk; (v) Preserved fish products, such as pickled herring and dried or salted cod, and other acidified fish products defined in 21 CFR 114 Acidified foods; (vi) Shelf stable, dry fermented sausages, such as pepperoni and Genoa salami; and (vii) Shelf stable salt-cured products, such as prosciutto and Parma ham.

10D – food properly labeled; original container

Rule citation: 511-6-1.04(4)(d) – food storage containers identified with common name of food (c)

Official point value: 3

Corrected during inspection: Yes

Repeat violation: No

Inspector notes and corrective action: Observed bulk food items removed from their original packages with no common name labels. PIC placed name on items. 511-6-1.04(4)(d) – Food Storage Containers Identified with Common Name of Food (C) (d) Food Storage Containers, Identified with Common Name of Food. Except for containers holding food that can be readily and unmistakably recognized, such as dry pasta, working containers holding food or food ingredients that are removed from their original packages for use in the food establishment, such as cooking oils, flour, herbs, potato flakes, salt, spices, and sugar shall be clearly and legibly identified, in English, with the common name of the food.

17B – garbage/refuse properly disposed; facilities maintained

Rule citation: 511-6-1.06(5)(n) – covering receptacles (c)

Official point value: 1

Corrected during inspection: No

Repeat violation: No

Inspector notes and corrective action: Observed outside dumpster lid in disrepair and area around dumpster in need of pressure washing. 511-6-1.06(5)(n) – Covering Receptacles (C) (n) Covering Receptacles. Receptacles and waste handling units for refuse, recyclables, and returnables shall be kept covered: 1. Inside the food service establishment if the receptacles and units: (i) Contain food residue and are not in continuous use; or (ii) After they are filled; and 2. With tight-fitting lids or doors if kept outside the food service establishment.

17D – adequate ventilation and lighting; designated areas used

Rule citation: 511-6-1.07(2)(j) – heating, ventilation, air conditioning, system vents, designed to prevent contamination (c)

Official point value: 1

Corrected during inspection: No

Repeat violation: No

Inspector notes and corrective action: Observed dust accumulation on A/C vents throughout the main kitchen. 511-6-1.07(2)(j) – Heating, Ventilation, Air Conditioning, System Vents, designed to prevent contamination (C) (j) Heating, Ventilating, Air Conditioning, System Vents. Heating, ventilating, and air conditioning systems shall be designed and installed so that make-up air intake and exhaust vents do not cause contamination of food, food-contact surfaces, equipment, or utensils.

17D – adequate ventilation and lighting; designated areas used

Rule citation: 511-6-1.07(4)(b) – designated areas for employee activity, located to prevent contamination of food, equipment, utensils, linens, & single service articles (c)

Official point value: 1

Corrected during inspection: No

Repeat violation: No

Inspector notes and corrective action: Observed employee personal belongings on prep table in the main kitchen. 511-6-1.07(4)(b) – Designated Areas for Employee Activity, located to prevent contamination of food, equipment, utensils, linens, & single service articles (C) (b) Designated Areas for Employee Activity. 1. Areas designated for employees to eat, drink, use tobacco products and electronic devices shall be located so that food, equipment, linens, and single-service and single-use articles are protected from contamination. 2. Lockers or other suitable facilities shall be located in a designated room or area where contamination of food, equipment, utensils, linens and single-service and single-use articles cannot occur.

General inspector comments

Please provide documentation of the repair of the dish machine to rachel.williams@dph.ga.gov by 11/30/26.

About the report

The Georgia Department of Public Health report documents conditions observed during this inspection. The score should not be interpreted as a guarantee of conditions before or after the inspection.

Marcus Jones
News Now Georgia

Share This Story